Brodersen RTU8, Getting Started Manual

Page: 11 / 11

11
ld m40.0 (load marker bit)
jmpc l abel7 (jump if true)
mov c0 m40.2 (reset interlock bit)
label7: (jump label)
ld m40.1 (load marker bit)
andn m40.3 (and the interlock bit negated)
jmpcn label8 (jump if false)
mov bc1 bm3 (select telephone number 0)
mov bc1 bm19 (select message number 0)
mov bc3 bm2 (send SMS)
mov c1 m40.3 (set interlock bit)
mov c1 m40.4 (set second interlock bit)
jmp label11 (jump)
label8: (jump label)
ld m40.1 (load marker bit)
jmpc label9 (jump if true)
mov c0 m40.3 (reset interlock bit)
label9: (jump label)
label10:
ld m20.4 (load Message Sent bit)
or m20.7 (or Message Failed bit)
jmpcn label11 (jump if false)
mov c0 m40.4 (reset second interlock bit)
label11: (jump label)
ep
If you cut and paste these instructions into a B-CON editor please ensure that the comments
in brackets are prefixed with a forward slash (/).
The above may not be exactly what you need for your application but it will, hopefully, give
you head start in implementing SMS functions into an RTU8.
Brodersen Controls A/S ● Industrivej 3 ● DK-4000 Roskilde ● Tel: +45 46 74 00 00 ● Fax: +45 46 75 73 36
E-mail: bc@brodersencontrols.com ● Internet: www.brodersencontrols.com