Pressurized Cab Filter
K00037
15. You’re now going to mount the filter back
onto the broom the same way you took it off.
It is ideally a job for 2 people but with time,
one person can get it attached.
16. Once attached, you’ll need to connect the
hosing back together and the wiring.
17. For the wiring, the triangle end should fit
back into where you removed it from. Then
take the modified end and come over behind
the horn and unplug the white wire. Also
remove the nut on the black wire which is
where you will ground it to.
18. Now plug the red wire into where the
white one was. Then put the white one back
one. Next take the black wire and put it in the
ground spot and reattach the screw.
19. After everything is attached, it’s a good
idea to take any loose wires and zip tie them
up so that they are out of the way. Best place
is to tuck it in between the filter and the hose.
20. Lastly, install a 25 amp fuse into position
#9 in the fuse box which is located in the cab.
13
14
17
You can see a video of this install on
the Broce website or by visiting our
YouTube channel.