manualshive.com logo in svg

Brocade Communications Systems VDX 6940 Series, Hardware Installation Manual, Page: 7 / 136

Share
Download
Brocade Communications Systems VDX 6940 Series Hardware Installation Manual Download Page 7

Preface

● 

Document conventions......................................................................................................7

● 

Brocade resources............................................................................................................ 9

● 

Contacting Brocade Technical Support.............................................................................9

● 

Document feedback........................................................................................................ 10

Document conventions

The document conventions describe text formatting conventions, command syntax conventions, and
important notice formats used in Brocade technical documentation.

Text formatting conventions

Text formatting conventions such as boldface, italic, or Courier font may be used in the flow of the text
to highlight specific words or phrases.

Format

Description

bold

 text

Identifies command names

Identifies keywords and operands

Identifies the names of user-manipulated GUI elements

Identifies text to enter at the GUI

italic

 text

Identifies emphasis

Identifies variables

Identifies document titles

Courier font

Identifies CLI output

Identifies command syntax examples

Command syntax conventions

Bold and italic text identify command syntax components. Delimiters and operators define groupings of
parameters and their logical relationships.

Convention

Description

bold

 text

Identifies command names, keywords, and command options.

italic

 text

Identifies a variable.

value

In Fibre Channel products, a fixed value provided as input to a command
option is printed in plain text, for example, 

--show

 WWN.

Brocade VDX 6940 Hardware Installation Guide

7

53-1003495-02

Summary of Contents for VDX 6940 Series









































































































































Reviews:

No comments