ENTERPRISE & MOBILITY
DEPLOYMENT GUIDE
Deploying Brocade Mobility Products with the Brocade FastIron CX Series
Page 14 of 16
Step 3: Adopt AP300 in RFS7000
1.
The Brocade AP300 will be automatically detected by the RFS7000. Go to
Network > Access Point
and click
the
Unadopted AP
tab.
2.
Referencing the correct MAC address, select the AP300 to adopt and click
Adopt
. Once the AP has been
adopted it can be found in the Adopted Tab.
Brocade AP7131/AP5181
Step 1: Provide power to the access point
Step 2: Connect to the console using these console terminal settings
-
19200 bps transfer rate
-
8 data bits
-
No parity
-
1 stop bit
-
No flow control
-
No hardware compression
Step 3: Set the IP address
1.
Connect to the AP console port.
2.
Initial login procedure:
-
login: admin
-
Password: admin123
-
admin>
3.
Enter the network submenu:
admin>network
admin(network)>
