Brocade Communications Systems Brocade TurboIron 24 Series, Hardware Installation Manual, Page: 64 / 78

64 Brocade TurboIron 24X Series Hardware Installation Guide
Part Number: 53-1003053-03
Hardware Specifications
Power supply specifications
Electrical specifications
Table 14 lists the electrical specifications for the power supplies.
The TurboIron 24X power supply is designed exclusively for use with TurboIron 24X devices. Installing the
power supply in a device other than the TurboIron 24X will cause extensive damage to your equipment.
TABLE 13 Safety warning labels on power supplies
ATTENZIONE Non aprire. Rivolgersi a personale qualificado.
CUIDADO Partes adentro no reparables por el operador. Refiera reparo a personal autorizado.
ATTENTION Entretien et répartions internes ne sont autorisés qu'au personnel technique qualifié.
GEFAHR Zugang zur Bedienung nicht erförderlich. Wartung nur durch qualifiziertes Personal.
TABLE 14 Power supply electrical specifications
Description Ranges
AC
Input Specifications
Input voltage range 100 to 240 VAC
Input current 5 Amps
Inrush current 70 amps peak maximum at cold start for a 1/2 cycle at any rated input voltage
decaying to the nominal value within 100 milliseconds(240 VAC)
Output Specifications
Output power 300 watts of total output power