Brocade 6520 Hardware Reference Manual
27
53-1002705-01
Power supply removal and replacement
4
DRAFT: BROCADE CONFIDENTIAL
•
At the command prompt, enter the psShow command to display power supply status as
shown below:
br6520:admin>
psshow
Power Supply #1 is OK
V10529, TQ2H0000030 ,60-0300031-01,X2, ,SP640
,2X,TQ2H0000
Power Supply #2 is OK
V10541, TQ2H0000189 ,60-0300031-01,X3, ,SP640-2P ,A
,TQ2H0000
br6520:admin>
DANGER
Disconnect the power cords from all power sources to completely remove power from the
chassis.
Time and items required
Replacing a power supply in the Brocade 6520 should require less than two minutes to complete.
You need the following items to replace a power supply in a Brocade 6520:
A new power supply that has the same part number and airflow indicator as the power supply
being replaced - refer to
on page 27 for the location of the airflow labels
FIGURE 8
Brocade 6520 power supply detail
1
Power supply #2
5
Locking tab
2
Grounding screw
6
DC output status LED
3
Handle
7
Airflow label
4
AC input status LED
8
Power cord receptacle
