10
Brocade 7500 Extension Switches Hardware Reference Manual
53-1000026-04
Items included with the Extension Switch
2
•
Ensure that airflow and temperature requirements are met on an ongoing basis, particularly if
the SAN Router is installed in a closed or multirack assembly.
•
Verify that the additional weight of the SAN Router does not exceed the cabinet’s weight limits
or unbalance the cabinet in any way.
•
Secure the cabinet to ensure stability in case of unexpected movement.
For additional installation, electrical, environmental, and other considerations, see the
Brocade
Safety Guide
.
Items included with the Extension Switch
The following items are included with the standard shipment of the Extension Switch:
•
The 7500 Series Extension Switch, containing three fan assemblies and two power supplies
•
The following rack mount kits are optionally available:
-
Fixed rack mount kit, with installation instructions
-
Slide rack mount kit, with installation instructions
-
Mid-mount kit, with installation instructions
•
One accessory kit, containing the following items:
-
QuickStart Guide
-
Brocade Documentation CD
-
Brocade Fabric Manager Evaluation CD (not required for installation)
-
Optional SFP transceivers for Fibre Channel ports.
•
16 for 7500 model.
•
Two for 7500E model.
-
2 SFP transceivers for the GbE ports (optional)
-
Rubber mounting feet (to be used when setting up the Extension Switch as a standalone
unit)
-
Two grounded 6-ft (approximately 1.83 m) power cords:
•
Power plug type is NEMA5-15
•
Power plug current/voltage rating: 15A/125V
•
Cordage type: SVT
•
Current rating/wire gauge: 10A/ 18AWG
•
Connector at system end of cordset: IEC 60320/ C13
-
One RJ-45 serial cable, 10-ft (approximately 3 m) long. The Extension Switch uses an
RJ-45 connector for serial port. An RJ-45 to DB9 adaptor is also provided with the SAN
Router.