46
Brocade SMI Agent User’s Guide
53-1001778-01
CIMOM server configuration
3
FIGURE 29
Configure the CIMOM server
Configuring log file options
You cannot configure log file options with the SMI Agent Configuration Tool. The following
procedure describes how to change the log file options by modifying the
jserver.properties
file.
1. Open the
jserver.properties
file found at
…server/jserver/bin
.
2. Uncomment the following lines:
# com.wbemsolutions.jserver.logdirectory=/mylogfiledir
#com.wbemsolutions.jserver.log.maxfilesize=5000000
#com.wbemsolutions.jserver.log.numfiles=3
Replace
mylogfiledir
with the complete path of the log file directory.
Replace
5000000
with the maximum size of the log file (in KB).
Replace
3
with the number of rotating log files.
When the specified size is exceeded on the first log file, logs are written to the next log file. When
approximately the specified number of KB have been written to one log file, another log file is
opened.
NOTE
Sometimes log file will exceed the size specified because of a limitation in Java logging. After the
server is stopped, the size of the log file will be reduced to the size specified.
