7.08.2017
Brobo Group Warranty
1.1 The supplier warrants that all goods supplied by it, shall be free from defects in materials and workmanship for
a period of twenty four (24) months from the date of delivery to the Customer. ("The Warranty Period"), on the
following terms and conditions.
1.2 The Customer shall promptly provide written particulars to the supplier on becoming aware of any defect in the
goods during the Warranty Period, and shall provide the Supplier with all necessary access, facilities and
information to enable the Supplier to ascertain or verify the nature and the cause of the defect and to carry out
its obligations under this warranty.
1.3 The Supplier's obligation under this warranty is limited to repairs of the defect goods and the Supplier is under
no obligation to replace the goods or refund the value of the goods to the Customer.
1.4 If the goods are, in the opinion of the Supplier, not defective or if any defect is attributable to any one or more
of the following circumstances then the Supplier is under no obligation whatsoever to the Customer:
1.4.1
The use of the goods for a purpose other than that for which they were intended to be used;
1.4.2
The repair, modification or alteration of the goods by any person other than the Supplier;
1.4.3
Where the defect has arisen due to misuse, neglect or accident, howsoever arising;
1.4.4
Where the defect has arisen due to installation of the goods which were, in the reasonable opinion of the
Supplier, incorrectly carried out
1.4.5
Where the goods have not been correctly stored or maintained
1.4.6
Where the defect has arisen due to normal wear and tear on the goods
1.5 The Supplier is under no obligation under this warranty where the Customer has failed to observe the terms of
payment for the goods or any other obligation imposed by the terms and conditions of this warranty.
1.6 In the event that the Supplier is supplying goods, which have been manufactured by third parties, the Customer
shall be entitled to the benefit of any Manufacturer's Warranty in respect of such goods. The Customer
acknowledges that the Supplier accepts no responsibility whatsoever for any Manufacturer's Warranty or any
claim howsoever arising from the use of the goods, whether singularly or in combination with other products.
1.7 The Supplier shall not be liable for any indirect or consequential losses or expenses suffered by the Customer,
howsoever caused.
1.8 Except as specifically set out herein, or in writing by way of catalogue or pamphlet or otherwise provided by the
Supplier to the Customer any term, representation, condition or warranty in respect of the quality, condition or
description of the goods, whether implied by statute, common law, trade usage, custom or otherwise, is hereby
expressly excluded.
This warranty is given by
Brobo Group Pty Ltd,
ABN: 42 098 264 316
Address: 8 Fowler Rd, Dandenong, VIC 3175
✆
03 9794 8751
🖷
03 9794 8792
✉
This warranty is provided in addition to other rights and remedies you have under law: Our goods come with
guarantees which cannot be excluded under the Australian Consumer Law. You are entitled to replacement or
refund for a major failure and to compensation for other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure.
Summary of Contents for BDF32-1
