INST
ALLA
TION MANUAL
INST
ALLA
TION
18
1 ]
Run house power cable between service panel and hood location. Run the house power
cable into the hood through the strain relief previously installed in step
6
on page 10.
2 ]
Hang hood from 4 mounting screws previously installed. Slide hood back towards wall until
mounting screw heads are engaged in narrow end of keyhole slots in top of hood.
While
holding the hood
, tighten screws securely. Attach power cable to the hood using the strain
relief.
DUCTED INSTALLATION ONLY
Install the Hood (Standard installation)
3 ]
Connect ductwork to hood and use metal foil duct tape to make joints secure and air-tight.
Make sure the damper assembly (or round duct plate) enters the ductwork and that the
damper opens and closes freely.
