INST
ALLA
TION MANUAL
INST
ALLA
TION
10
B
C
Prepare the Hood
1 ]
If present, remove all protective polyfilm from the hood and/or parts.
2 ] For BCDJ1 Series only:
Remove 7” Round Duct Plate from top/back of hood (see illustration
below). Keep the screws for further use.
For BCDJ Series and NCDJ1 Series:
Remove the
adapter/damper from back of hood (see illustration below). Keep the screws for further use.
3 ]
Using the finger cup, remove the grease filters from the hood by pushing down
and tilting
filters out
.
7” ROUND
DUCT PLATE
2 SCREWS
1
2
3
4
5
6
7
4 ]
Using a 11/32” nutdriver or socket, remove the lock nut retaining the flange of the right cover
plate (shaded part on illustration below) to the inner back of hood (see inset). Remove the
right cover plate retaining screws (7 screws), then set the blower cover along with its screws
and nut aside.
BACK OF HOOD
LOCK
NUT
2 SCREWS
BCDJ1 Series
and NCDJ1 Series
BCDJ1 Series
