EC 17 / 19 Series User Manual
18
3.2.2 Connecting the Console
To connect an LCD console to a computer, perform the following steps
Figure 3-1. The rear view of LCD console
1. Turn off your computer. You should always turn off your computer before
connecting or disconnecting a device.
2. Connect the video (VGA) connector of the VGA cable to the video card connector
on the rear panel of your computer.
3. Connect connector of USB cable to USB ports on the rear panel of your computer.
4. Connect the AC to DC power adapter to the power inlet on the console and then to
a power outlet.
3.3 Turning on the Console
Make sure all cables and the AC to DC power adapter are connected properly. Be
sure to tighten all connector screws. Grab the front handle. Pull the console all the
way out then lift the panel up. The power LED underneath the LCD monitor will be
green light.
3.4 Testing the Console
To test that the console is working properly, perform the following steps:
1. Power up the console, and then turn on your computer.
2. Make sure the video image is centered within the screen area. Use the OSD
controls to adjust the image (see note below) or press the Auto button underneath
the LCD monitor.
If the unit does not power on when the panel is pulled up, try to push
the power on/off button underneath the LCD monitor to power up the
unit.