background image

Broadcom

- 5 -

MegaRAID SAS 9361-4i and SAS 9361-8i RAID Controllers Quick Installation Guide
March 9, 2018

MegaRAID

®

 SAS 9361-4i and SAS 9361-8i RAID Controllers Quick Installation Guide

Technical Support

before or at the same time that the power to the host computer is turned on. If the power is turned on to the host 
computer before it is turned on to the devices, the host computer might not recognize the devices.

The firmware takes several seconds to initialize. During this time, the RAID controller scans the ports.

8.

Run the MegaRAID BIOS Configuration Utility.

 Run the MegaRAID BIOS Configuration Utility to configure the 

groups and the virtual drives. When the message about the configuration utility appears on the screen, 
immediately press 

Ctrl+R

 to run the utility.

Refer to the 

MegaRAID SAS Software User Guide

 for detailed steps on configuring drive groups and virtual drives.

9.

Install the operating system driver.

 The RAID controller can operate under various operating systems, but you 

must install the software drivers first.

You can view the supported operating systems and download the latest drivers for RAID controllers at 

https://www.broadcom.com/support/download-search

.

Refer to the 

MegaRAID SAS Device Driver Installation User Guide

 for more information about installing the driver. Use 

the latest service packs provided by the operating system manufacturer and review the 

readme

 file that 

accompanies the appropriate driver.

4

Technical  Support

For assistance in installing, configuring, or running your MegaRAID SAS 9361 RAID controller, contact a Broadcom 
Technical Support representative.

Website:

 

http://www.broadcom.com/support/

Phone Support:

 

http://www.broadcom.com/support/call-us

1-800-633-4545 (North America)

00-800-5745-6442 (International)

49 (0) 8941 352 0123 (Germany)

NOTE

The international toll-free number does not require country-specific 
access codes.

Documents and Downloads:

 

http://wwwbroadcom.com/support/download-search

5

Revision History

5.1

Revision E, March 9, 2018

The following document changes were made.

Revised support information.

Updated the template and branding to Broadcom.

5.2

53774-00, Rev. D, May 2014

Revised controller installation figure.

Summary of Contents for MegaRAID SAS 9361-4i









Reviews: