X7-8-Install-IG100 Installation Guide
Brocade
®
X7-8 Director Hardware Installation Guide
Downloading the Configuration
Once the chassis and its various components have been reassembled and powered back on, use the
configDownload
command to restore the original configuration. The
configDownload
command can be entered through a telnet or serial
session, but the device must have an Ethernet connection to the server name or IP address of the host for the download
process to complete. For more information, refer to the
help configDownload
command or the
Brocade Fabric OS
Command Reference Manual
.
Complete the following steps to download the configuration:
1. Log on to the device as
admin
.
switch:admin> login
login: admin
password: xxxxxxxx
switch:admin>
NOTE
If you are using the Virtual Fabrics feature, you must run the
configdownload -vf
command
before
running the
configdownload
command to restore the logical switch configuration.
2. Enter the
chassisDisable
command.
3. Enter the
configDownload
command.
switch:admin> configdownload -all
Server Name or IP Address [host]: 123.123.123.123
User Name [None]: Admin24
File Name [config.txt]: config-switch.txt
Password: xxxxxxxx
download complete
switch:admin>
4. Reboot the device.
5. Enter the
chassisEnable
command to enable all user ports and enable a virtual fabric-aware chassis.
Reconnecting the System to the Network and Fabric
Complete the following steps to reconnect the device to the network and fabric.
1. Connect the CP blades to the local area network by following all steps in the following sections:
•
Establishing a Serial Connection to the Device
•
•
Establishing an Ethernet Connection to the Device
NOTE
Once an Ethernet connection is established, the device can be accessed by remote connection using any
of the available management tools, such as Telnet or Web Tools.
X7-8-Install-IG100
196
Broadcom
Summary of Contents for Brocade X7-8
Page 212: ......
