background image

Europe—EU Declaration of Conformity and Restrictions 

Hereby, Broadcom Corp, declares that this equipment complies with the essential requirements and 
other relevant provisions of Directive 1999/5/EC.  

This equipment is marked with the 

0984

symbol and can be used throughout the 

European community.  

This indicates compliance with the R&TTE Directive 1999/5/EC and meets the relevant parts of 
following technical specifications: 

EN 300 328 – Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband 
Transmission Systems; Data transmission equipment operating in the 2,4GHz ISM band and using 
spread spectrum modulation techniques; Harmonized EN covering essential requirements under 
article 3.2 of the R&TTE directive. 

EN 301 893 - Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; 
Harmonized EN covering essential requirements of article 3.2 of the R&TTE Directive

EN 301 489-17 - Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Electromagnetic 
Compatibility (EMC) standard for radio equipment and services; Part 17 Specific Conditions for 
Wideband Data and HIPERLAN Equipment. 

EN 60950 - Safety of Information Technology Equipment. 

EN 50385 – Product standard to demonstrate the compliances of radio base stations and fixed 
terminal stations for wireless telecommunication systems with the basic restrictions or the reference 
levels related to human exposure to radio frequency electromagnetic fields. 

Marking by the symbol  

  indicates that usage restrictions apply. 

France - 2.4GHz for Metropolitan France :  

In all Metropolitan départements, wireless LAN frequencies can be used under the following 
conditions, either for public or private use:  

· Indoor use: maximum power (EIRP*) of 100 mW for the entire 2400-2483.5 MHz frequency band 

· Outdoor use: maximum power (EIRP*) of 100 mW for the 2400-2454 MHz band and with maximum 
power (EIRP*) of 10 mW for the 2454-2483 MHz band 

Caution: Exposure to Radio Frequency Radiation 
To comply with RF exposure compliance requirements, a separation distance of at least
 20 cm must be maintained between the antenna of this device and all persons.

Summary of Contents for BCM943225HM




















Reviews: