Windows Instructions
WICED Smart Quick Start Guide
Broadcom
®
WICED Smart Development System
September 24, 2014 • MMPWICED-Smart-QSG203-R
Page 11
Connect the WICED Smart Tag
The USB interface connects the WICED Smart tag to the PC. The USB interface provides a serial-UART
interface for programming and debugging, and can also p5V power.
To enable the USB interface of the tag, verify the following switch settings before proceeding:
1.
Each of the eight DIP switches on the
SW4
mini-switch are set to ON.
2. SW2
should be in the VUSB position (up) and
SW3
should be in the VREG position (down).
Connect the WICED Smart tag to the development PC with a USB cable; the USB UART driver will load
automatically.
SW2
SW3
SW4
Broadcom
Confidential
