3
2.
Connecting AudioFetch to audio sources and WiFi
Connect each audio source to a channel input on AudioFetch. There are 3 input options
per channel. CHOOSE ONLY ONE INPUT PER CHANNEL. Two popular analog connections
are RCA (one red and one white) and a 3.5mm stereo jack (headphone jack). Either one
can be connected into the Analog input of AudioFetch which is a 3.5mm stereo jack.
Digital connection options are optical and digital coax.
Note that RCA and digital coax connections are not the same. A digital coax output (on TV,
etc.) cannot connect into the AudioFetch analog input. An RCA analog output (from TV,
etc.) cannot connect into the AudioFetch digital coax input. The configuration
management pages can be logged into as described below to determine if a good audio
signal is connected into the channel. When connecting via digital inputs, always choose
the audio source type (in the TV’s setup) as PCM since Dolby-encoded signals are not
supported.
Picture B: Audio Input
Picture A: Cable Types
RCA
Plugs
3.5mm
Stereo Plug
Optical
Plug
Digital
Coax
Remove
Protective
Cover
