3
2.
Connecting AudioFetch to Audio Sources
Connect an audio source to one of the 3 input options. CHOOSE ONLY ONE INPUT
CONNECTION. Two popular analog connections are RCA (one red and one white) and a
3.5mm stereo jack (headphone jack). Either one can be connected into the Analog input of
AudioFetch which is a 3.5mm stereo jack. Digital connection options are optical and digital
coax.
Note that RCA and digital coax connections are not the same. A digital coax output (on TV,
etc.) cannot connect into the AudioFetch Express analog input. An RCA analog output (from
TV, etc.) cannot connect into the AudioFetch Express digital coax input. The configuration
management pages can be logged into as described below to determine if a good audio
signal is connected into the channel. When connecting via digital inputs, always choose the
audio source type (in the TV or STB menu) as PCM since Dolby Digital encoded signals are
not supported.
Picture B: Audio Input
Picture A: Cable Types
RCA
Plugs
3.5mm
Stereo Plug
Optical
Plug
Digital
Coax
Remove
Protective
Cover
Optical
Input
Digital
Coax Input
Analog
Input
choose one
