manualshive.com logo in svg

Broadcast Showman 1000, Handbook, Page: 40 / 71

Share
Download
Broadcast Showman 1000 Handbook Download Page 40

Multi-Standard Analogue TV Demodulator

Showman 1000

Operation

 2008 dB Broadcast Ltd

40

Provisional Version 0.3

Serial Flow Control

From System Options – Serial Flow Control:

Press <ENTER>

Press 

▲ or ▼ to select RTS/CTS or None

Press <ENTER> to accept or <ESCAPE> to reject the selection.

Press <ESCAPE> <ESCAPE> to return to DEFAULT.

LCD Contrast Adjust

From System Options – LCD Contrast Adjust:

Press <ENTER>

Press 

▲ or ▼ to obtain optimum contrast.

Press <ENTER> to accept or <ESCAPE> to reject the selection.

Press <ESCAPE> <ESCAPE> to return to DEFAULT.

Set Time and Date

From System Options – Set Time and Date:

Press <ENTER>

Press 

◄ or ► to highlight the time or date digits to be adjusted.

Press 

▲ or ▼ to adjust the digit values.

Press <ENTER> to accept the settings and start the clock or <ESCAPE> to reject the 
selection.

Press <ESCAPE> <ESCAPE> to return to DEFAULT.

Date Format

From System Options – Date Format:

Press <ENTER>

Press 

▲ or ▼ to select DD/MM/YY or MM/DD/YY format

Press <ENTER> to accept or <ESCAPE> to reject the selection.

Press <ESCAPE> <ESCAPE> to return to DEFAULT.

Summary of Contents for Showman 1000








































































Reviews:

No comments