20
Sapphire HEVC Decoder User Manual
Upgrading the Sapphire HEVC Decoder, and Front Panel
For Sapphire HEVC Decoders web update of code is possible.
To carry out a web update follow the procedure below.
From a PC with a suitable browser application such as’ Firefox’ or ‘Chrome’, navigate to the
IP address of the Sapphire HEVC Decoder. The iP address can be found on the front panel
menus.
Note that as of version 1.2 there is an outstanding issue with the web server, which can at
times respond with a “Server unavailable” page/message. Normally power cycling the unit is
sufficient to resolve it so try this if you encounter this issue.
After downloading the file to the unit, when you see the transfer completed page, please
power cycle and wait approx. 10 minutes for the upgrade to complete. This is mostly due to
the codec chip firmware update.
1) Enter the IP address of the Sapphire HEVC Decoder, the web browser should show:
2) Click on Browse
3) Select the release tar file (e.g. B110_vx.y.tar)
