e-mail:
voice:
360.854.9559
fax:
866.783.1742
17
Status Sentinel Installation and Operation Manual
SPECIFICATIONS
Specifications
Ethernet Interface:
RJ-45, 10base-T or 100base-TX, auto sensing with
link & activity led indicators
- Full/half duplex.
Protocols:
TCP/IP, UDP/IP, ARP, ICMP, SNMP, TFTP,
Telnet, DHCP, BOOTP, HTTP, and AutoIP.
Status/Digital Inputs:
Three optically Isolated, 5 to 24 VDC.
Note:
The on-board 5VDC power source is used to
power these inputs.
On-board 5VDC Power Source:
Five-volts DC, current limited to 100ma.
Connectors:
Removable euroblock screw terminals
EMI / FCC Compliance:
See the Declaration of Conformity page.
Operation is subject to the following two conditions:
1) This device may not cause harmful interference,
and 2) this device must accept any interference
received, including that which may cause undesired
operation.
Required power supply:
7.5 VDC only @ 500ma. 2.1mm ID x 5.5mm OD
coaxial connector. Surge protected. Domestic PS
supplied.
Operating Temperature:
32 to 122 °F / 0 to 50 °C for all operating voltage
ranges.
Humidity:
0 - 90% RH, non-condensing.
Size:
6.18” x 3.70” x 1.42” (L,W,H)
Weight:
1.0 lb.
Options:
* CE certified 240 VAC power supply.
* RA-1, 1-RU rack shelf.
Note:
Velcro may be used to secure the product to
the RA-1 shelf.
WEBSITE:
Visit our web site for
product updates and
additional information.
