e-mail:
voice:
360.854.9559
fax:
866.783.1742
6
RJ-XLR Installation and Operation Manual
OPERATION
RJ45 Audio Jacks
The RJ-XLR Breakout Panel has eight sets of three RJ45 jacks (24 total), allowing
each pair of XLR jacks to feed one RJ45, labelled Stereo x/x, as a L/R stereo pair or
to feed two separate RJ45 jacks (AES x) as independent AES or mono signals.
Stereo RJ45 Audio Pinout:
See the “RJ45 to XLR Connection Tables” section of this manual for individual
RJ45 jack pinouts.
Please use shielded twisted pair Cat5e or Cat6 cables and connectors (STP) with the
input and output RJ45 audio jacks.
For AES/EBU signals please use AES/EBU digital audio qualified cable
XLR Audio Jacks
The RJ-XLR Breakout Panel has 16 XLR jacks, labelled 1-16 on the front panel and
labelled “1 LT, 2 RT, 3 LT, etc.) on the printed circuit board.
On the RJ-XLR 8F/8M XLR jacks 1-8 are male (XLR-M) and XLR jacks 9-16 are
female (XLR-F.) On the RJ-XLR 16F all 16 XLR jacks are female (XLR-F.)
On the RJ-XLR 16M all 16 XLR jacks are male (XLR-M.)
XLR Connector Pinout:
The input and output XLR connector pinouts conform to 3-pin XLR wiring standards:
Pin 1 = Ground
Pin 2 = Positive (+)
Pin 3 = Negative (-)
WEBSITE:
Visit our web site for
product updates and
additional information.
