
e-mail:
voice:
360.854.9559
fax:
866.783.1742
18
Audio Sentinel
®
4» Web Installation and Operation Manual
SET UP
“Email/Network Setup” Web Page – Email Logging Settings
Logging Email Address:
Email address for the “Logging” email recipient
(may be different from the 8 “Alarm” Recipient
Addresses. Logging emails and Daily emails are
sent to this address only.
Logging Email Snapshot Interval: The period in hours that a snapshot is taken of the sys-
tem. The logging email is not sent on this interval.
Logging Email Update Interval:
The period in hours that snapshots are emailed. This
email may contain multiple snapshots if the
Snapshot Interval is less than the Update Interval.
Each snapshot will be identified by the date and time.
“Email/Network Setup” Web Page – Email Alarm Settings
Email Alarms:
Choose Immediate and/or Daily. If Immediate is
selected, then an email will be sent out as soon as
an alarm is generated. If Daily is selected, then
each alarm is queued and emailed as a digest
every 24 hours. Both can be used at the same time.
The number of queued alarms is displayed on the
Monitor/Control page.
Daily Alarm Email Time:
The time that queued alarms are sent. Queued
alarms are sent to the Logging Email Address only.
“Alarm” Recipient Address:
Email addresses for up to 8 addresses. These
addresses correlate to the 8 email addresses selec-
table on the I/O Setup page.
“Email/Network Setup” Web Page – SNMP Manager Settings
SNMP Enable Traps:
When checked, SNMP trap messages will be sent.
When unchecked, no trap messages will be sent to
the manager.
SNMP Manager IP Address:
This is the IP address of the SNMP manager. The
system only accepts SNMP requests from this IP
address, and will send traps to this IP address only.
SNMP Manager Trap Port:
This is the port number that SNMP trap messages
will be sent to at the manager IP. Default port 161.
SNMP Read Community:
This is the community name used for Read-Only
access.
SNMP Write Community:
This is the community name used for Read-Write
access.
WEBSITE:
Visit our web site for
product updates and
additional information.