
e-mail:
support@broadcasttools.com
voice:
360.854.9559
fax:
866.783.1742
12
ACS 4.4 G2 Installation and Operation Manual
OPERATION
Setting Configuration Dip-switches
The ACS 4.4 G2 is equipped with an 8-position configuration dipswitch labelled
SW2. The dipswitch specifies a 2-bit unit ID, serial baud rate, audio modes (mix,
interlock, overlap), and other features listed below. The unit must be removed from
the case to access the Dipswitches. Remove power and any cables from the unit.
Use a Philips screwdriver to remove the screws holding the rear panel, along with
the ground screw. Slide the circuit board assembly out the back of the chassis.
Located the dipswitch labeled SW2. Set the Dipswitches for the desired configura-
tion listed below. When finished, carefully slide the circuit assembly back into the
chassis, reinstall the rear panel with the four panel screws. Follow the configuration
description below.
“OPTIONS” SW2 Dip-switch Functions
Unit ID Address DIP-switches
Baud Rate DIP-switch
WEBSITE:
Visit our web site for
product updates and
additional information.