Adding Team Members with a Remote Panel – Option #110
1RU remote panel for controlling aux outputs and macros. Great for remotely changing one of your aux outputs
for ISO recording or to feed an engineering monitor. Connect to the Service network connector on the Granite
Switcher. For connecting 1 remote panel a cross-over cable may be used. For connecting more than one a small
dedicated network switch should be added to connect them all with straight network cables, as shown below. In
this case the control panel should also be connected to this switch, rather than use the cross over cable as this will
streamline software updates.
Team Operation, Continued
Graphics/Clips Operator
Typical Wiring for 2 Remote Panels
1 GB Network
Switch
Connect to
Granite Switcher
Broadcast Pix Granite 5000 Installation Planning Guide Jan 2011
Page
22
Technical Director
Graphics/Clips Operator
Remote Panel