Mini-HDMI-WP User’s Manual
Wall Plate Miniature Multimode Fiber Optic HDMI Transmission System
Broadata Technical Support, [email protected]
11
4.0 MAINTENANCE AND TROUBLESHOOTING
4.1 Maintenance
There is no operator maintenance other then keeping the units
clean.
4.2 Troubleshooting
If the BCI Mini-HDMI-WP units do not operate properly after
installation, check for possible cable breaks, loose connections,
and incorrect cable connections. If a problem exists on the
fiber link, please check your fiber connectors for improperly
cleaned fiber cables and connectors. If problems persist that
may be fiber related, contact BCI at 1-800-214-0222 for further
assistance.
For electrical problems, perform the following troubleshooting
procedures:
1.
If the POWER indicator is OFF, check for the following:
a.
The line cord is plugged into the unit and your outlet
has power.
2.
If the POWER indicator is ON, but the units are not
working, check for the following:
a.
Make sure the appropriate (Multimode) fibers are being
used.
b.
Fiber and fiber connectors are not broken.
c.
For each unit, the transmit (TX) fiber is connected to
the other unit’s receiver (RX).
