19
WEB GUI CONFIGURATION
HDBaseT 18G/4K Multi-Format Presentation Switch w/ 5 Inputs and 2 Mirrored Outputs User Manual (LBC-PSW52)
NETWORK
This section provides controls for the IP configuration. The IP Address, Netmask and
Gateway can be set manually, or DHCP can be enabled for automatic IP configuration if
the local network supports it. Click on “Display Current Setting” to display the current IP
configuration. Click on “Apply” to confirm and activate any changes made to these settings.
Note: The default IP address is 192.168.1.254. If the IP address is changed then the IP
address required for WebGUI and Telnet access will also change accordingly.
FACTORY
This section provides a way to perform a factory reset on the unit.
FIRMWARE UPGRADE
To update the unit's firmware, click the “Choose File” button to open the file selection
window and then select the firmware update file (*.bin format) located on your local PC.
After selecting the file, click the “Upgrade” button to begin the firmware update process.
Once the process completes the unit will automatically reboot.
