LBC-PSW84 User’s Manual
Link Bridge
TM
Multi-format Presentation Switch
Broadata Technical Support, [email protected]
5
1.0 PRODUCT DESCRIPTION
The LBC-PSW84 is an HDBaseT™ capable 8 by 4 Digital Presentation
Scaler that can switch and scale HDMI/HDBaseT/PC/Composite Video
signals from any one of its eight inputs and simultaneously display it on
any of its HMDI or HDBaseT outputs. The unit supports four (4) HDMI
input, one (1) VGA input, one (1) composite input and two (2) HDBaseT
inputs. The unit has an HDMI bypass output, allowing local monitoring
of any of the HDMI or HDBaseT inputs, VGA and composite are not
supported by the bypass output.
It has the added benefit of control via IR remote control, RS-232, IP/Telnet
and WebGUI, with all information including system status presented on
its comprehensive OSD (On Screen Display).
The LBC-PSW84 features full 5play™ compliance for easy integration
with compatible transmitters and receivers. The LBC-PSW84 is
compatible with our Designer and Standard (LBH & LBC model) Series
transmitters and receivers. This makes both CAT-5e/6 transmission
and HDMI/DVI/VGA/YPbPrI conversion in one single system setup.
The units are easily monitored by a power/ link LED indicators.
Figures 1-1, and 1-2 below illustrate the front and rear panels of the
LBC-PSW84 unit and Figure 1-3 shows the remote control.
Features
• HDMI, HDCP and DVI compliant
• Full 5Play™ compliant: Video, Audio, LAN, and Control (IR &
RS-232 bypass)
• Supports Power over HDBaseT (PoH) on the CAT5e/6/7
output
to a compatible Receiver. HDBaseT inputs do not
support PoH
• Supports High-definition Audio: LPCM 7.1CH, Dolby TrueHD,
Dolby Digital Plus and DTS-HD Master Audio transmission
(32-192kHz sample rate)
• Supports distances of up to 100 meters on the output and
100m on the input over industry standard CAT5e/6/7 cable
• Supports scaling of any input signals to a wide range of HDTV
and PC output resolutions up to 1080p and WUXGA (RB)
