BCI LBS-32x32 User’s Manual
Link Bridge
TM
Universal 32x32 Optical/DVI/HDMI Matrix Switch
Broadata Technical Support, [email protected]
7
7
CONFIG:
Press this button to enter into the menu selections of
A. EDID Setting
Standard EDID: Use the built-in EDID which supports video
up to 1080p@60/WUXGA@60Hz.
Auto EDID: based on the TV/Display’s EDID
of the lowest connected output port.
Manual EDID: Support independent EDID by assigning the
selected input port to the selected output port.
B. IP Configuration
1. IP address,
2. Netmask,
3. Gateway.
C. Temperature
T1, T2: these figures shows the temperature inside the device.
D. LCD Contrast Range from 1~4
8
ALL:
Press this button to select all outputs to one input.
9
0~9:
Press these numbers when selecting input output ports.
10
IN/OUT
: Press this button to select input source to display on
output display. The sequence should be IN/OUT-number of input
source-IN/OUT-number of output display-Enter. (This button
works only under In/Out function)
11
LOCK:
Press this button to lock all the function buttons on
panel. To unlock, press and hold lock button for 4 seconds.
12
SAVE:
Press this button to save the present setting of the I/O.
There are 10 pre-sets available for saving.
13
RECALL:
Press this button to recall from the saving settings of
1~10.
14
ENTER:
Press this button every time to confirm the setting or
the selection.
