BCI LBS-08x08 User’s Manual
Link Bridge
TM
Universal 8x8 Optical/DVI/HDMI Matrix Switch
Broadata Technical Support, [email protected]
11
Once in the command line interface (CLI) type “telnet”, the IP
address of the unit you wish to control, then hit enter.
Note: The IP address of the Matrix can be displayed on the
device’s
LCD monitor by pressing the “Config” button twice,
then ENTER.
This will bring us into the device which we wish to control. Type
“HELP” to list the available commands.
Type “IPCONFIG” To show all IP configurations. To reset the IP,
type “RSTIP” and to use a set static IP, type “SETIP” (For a full
list of commands, see Appendix A).
