LBO-SV-AD-T User’s Manual
Link Bridge
TM
Fiber Optic S-Video/Composite Video Scaling Transmitter System
Broadata Technical Support, [email protected]
9
2.2.1 Electrical Cable Connection
The three available cable connections on the electrical side are
for SV video, audio and data connections. Follow the proceeding
instructions in order to properly install your electrical
connections.
2.2.1.1 SV Video Interface
Use the following instructions to properly connect your intput
S-Video or Composite video as illustrated in Figure 2-2.
1.
Connect the LBO-SV-AD-T (Transmitter) unit’s S-Video
or Composite input port to the corresponding user’s
S-Video or Composite video source with the appropriate
video cables.
2.
Note that the LBO-SV-AD-T has an auto sensing feature
which will select the connected input video interface
(S-Video or Composite video). If both S-Video and
Composite video input are connected, S-Video will be
the default input.
Figure 2-2
Input Video Connection
User’s S-Video
Equipment
User’s Composite
Video Equipment
User’s Composite
Video Equipment
User’s S-Video
Equipment
