STEP 2: POWERING UP THE DEVICES
Quick Install Guide-LBN-MSx
4
Power Over Ethernet (PoE) allows you to supply power to the AVoIP
Encoders and Decoders via a PoE-enabled Network Switch, removing the
need for additional power supplies at each location.
5
Connect the supplied AC Power Cord to the power recepticle on the back of the
switch and the other end to a power source such as an electrical outlet or surge
protector.
Power Recepticle
6
Connect the supplied Power adapter to the 19V Power Port on the back of the
AVoIP Matrix Switching Controller and the other end to a power source such as an
electrical outlet or surge protector.
Power Port
Network Switch Back Panel
AVoIP Matrix Switching Controller
Back Panel
Allow 1-2 minutes for the Switch and Controller to initialize to supply power
to all connected devices.
7
You are now ready to connect Audio/Video Sources to the HDMI or VGA Connector
on the Encoder and Monitors/Displays to the AVoIP Decoder.
!
!
