LBH-H/O-EAD-R-ICP User Manual
Link Bridge
TM
HBaseT/HDMI Receiver System w/External Audio and Inline Control Processor
Broadata Technical Support, (800) 214-0222
16
Local Unit
The first two lines in this panel show the Local unit type and software
version. Below that is the address setup and status for the Network
Keypad. The next two pull down menus are for selecting the virtual
keypad size and enabling Auto Action Triggers. The last line shows the
link status.
Network Keypad Address
: Enter the IP address of the network keypad
(LB-KP8E or LB-KP16E) if one is present in the system. Use the
BCI
Product Configuration
program to discover the network keypad’s IP
address.
Network Keypad Status
: Shows type of network keypad connected
to ICP.
Virtual Keypad Size
: Select
8 keys
or
16 keys
. 8 keys option: maximum
of 10 actions per key. 16 keys option: maximum of 5 actions per key.
Auto Action Triggers
: Select
Enable
to enable the auto action triggers
defined in the
Configure Auto Action
page. Select
Disable
to disable
all auto action triggers.
Link Status
: Shows status of link with remote unit.
Local Unit RS-232 Options
This panel is used to configure the local RS-232 channels.
Channel:
Select channel 1, 2, 3 (Local Pass-through) or 3 (Remote
Pass-through).
Channel 1/2
: RS-232 control channels.
Channel 3 (Local Pass-through)
: RS-232 pass-through or control
channel. This channel defaults as a control channel. See
Pass-through
Channel
below to change to pass-through channel.
