LBC-H/V-T-SCL User’s Manual
Link Bridge
TM
HDMI Scaler System
Broadata Technical Support, (800) 214-0222
8
Note
: DO NOT connect LAN cable with any of the
CAT5e/6/7 port. Doing so may trigger power shut down
and ruin the device
5.
IR Blaster
:
Connect to the supplied IR Blaster cable for IR signal
transmission. Place the IR Blaster in direct line-of-sight of the
equipment to be controlled.
6.
IR Extender
:
Connect to the supplied IR Receiver cables for IR signal
reception. Ensure that remote being used is within the direct
line-of-sight of the IR Extender.
7.
MODE LED
:
This LED will illuminated when the power is connected.
8.
Link LED
:
This LED will illuminate when the slot has been connected to
the Transmitter and the Transmitter has connected with sources
that shows image on screen.
9.
CAT5e/6 OUT
:
Connect to the Receiver unit with a Single CAT5e/6/7 cable for
transmitting all data signals.
