Broadata LBC-H-R-SCL-ICP, User Manual, Page: 34 / 51

LBC-H-R-SCL-ICP User Manual
Link Bridge
TM
HBaseT HDMI Receiver with Inline Control Processor
Broadata Technical Support, Sales@Broadatacom.com 35
Telnet Connection Label : Enter a label for the telnet connection.
Connection Status : This box shows the status of a persistent
connection.
Telnet Options
IP Address
: Enter IP address of telnet server.
IP Port : Enter port number of telnet server. The default port number is
23.
UserName Prompt : Enter username prompt from telnet server. Leave
blank if there is no username prompt.
UserName : Enter user name required for log in. Leave blank if there
is no username.
Password Prompt : Enter password prompt from telnet server. Leave
blank if there is no password prompt.
Password : Enter password required for log in. Leave blank if there is
no password.
Command Prompt : Enter command prompt from telnet server. Only
the last 9 characters of the command prompt are needed. Leave blank
if there is no command prompt.
Note: Select check box below if string is used as a one-time only
greeting.
Auto Trigger : Select Telnet Trigger 1 or Telnet Trigger 2. This selection
associates the telnet connection with Telnet Trigger 1 or Telnet Trigger
2 used in Auto Actions.
Tx Spacing : Enter the delay (seconds) before command is transmitted
in Telnet Actions. Enter 0 if no delay is desired.