LBC-H/O-R-ICP User Manual
Link Bridge
TM
HBaseT/HDMI Receiver w/Inline Control Processor
Broadata Technical Support, [email protected]
7
4.
Terminal Block A
Audio In L/R
- Connect a stereo audio source to the Audio
In (L), Audio In (R) and GND pins. This audio input can be
selected as a source for the Audio Out.
Audio Out L/R
- Connect the Audio Out (L), Audio Out (R)
and GND to the audio input of the receiver/amp. The Audio
output can be the de-embedded HDMI audio or Audio Input.
Relay 1
- Connect to a device for relay control. N/O is
normally open with respect to COM.
IR+/IR
- : Connect to an IR blaster. The IR port can transmit
internally stored IR codes or act as an IR pass-through.
5.
Configuration connector – Connect a PC to this connector
to update the firmware.
6.
Video In switch – Select Auto for normal operation. Select
HDBT to manually select the video from the transmitter.
Select HDMI to manually select the video from the local
HDMI Input.
7.
Power input connector – Connect to the in24V
supply.
8.
Power LED – The green LED indicates the unit is powered
up.
9.
LAN 1 & LAN 2 RJ-45 connectors - Connect a CATx cable
from either LAN 1 or LAN 2 port to a LAN connection. The
LAN connection will pass-through to the transmitter.
Conversely, if the LAN port of the transmitter is connected
to a LAN connection, the LAN connection will pass-through
to LAN 1 and LAN 2 ports.