LBC-HDBT-Lite User’s Manual
Link Bridge
TM
HDbaseT HDMI Transmission System
Broadata Technical Support, (800) 214-0222
6
2.0 OPERATION CONTROLS AND FUNCTIONS
2.1 Transmitter Front and Rear Panels
1.
RS-232 In:
Connect to a PC or laptop with D-Sub 9 pin male
cable for the transmission of RS-232 commands.
2.
IR 2 Extender:
Connect to the supplied IR receiver cables for IR
signal reception. Ensure that remote being used is within the
direct line-of-sight of the IR extender.
3.
IR 1 Blaster:
Connect to the supplied IR blaster cable for IR
signal transmission. Place the IR blaster in direct line-of-sight of
the equipment to be controlled.
4.
HDMI In:
Connect to HDMI source equipment such as a DVD or
Blu-ray player.
5.
DC 24V:
Plug the 24 V DC power supply into the unit and connect
the adaptor to an AC outlet. Only one side of power needs to be
connected to activate both transmitter and receiver.
6.
Link LED:
The yellow LED will illuminate when both the input
and output signals are connected.
7.
Power LED:
This blue LED will illuminate when the device is
connected to a power supply.
8.
CAT5e/6 Out:
Connect to the reciever unit with a Single CAT5e/6
cable for tranmission of all data signals.
