LB-H2-HDV-SCL User Manual
Link Bridge
TM
HDMI 2.0 Scaler w/HDMI/DisplayPort/VGA Input
Broadata Technical Support, (800) 214-0222
6
2.0
OPERATION CONTROLS AND FUNCTIONS
2.1 Front Panel
1.
POWER
: Press this button to power on the unit or place it into
stand-by mode.
2.
POWER LED
:
a. Power on: LED will illuminate solid green.
b. Stand-by mode: LED will illuminate solid red. Telnet, RS-232
and WebGUI remain active in stand-by mode.
3.
IR Window
: Accepts IR signals from the included IR remote for
control of this unit only.
4.
MENU
: Press to enter the OSD menu, or to back out from
menu items.
5.
ENTER
: Press to confirm a selection or to go deeper into a
menu item.
6.
DOWN
: Press to move down within menus or to decrease
volume.
7,
UP
: Press to move up within menus or to increase volume.
8.
SOURCE
: Press to sequentially switch through the available
inputs (HDMI, VGA and DisplayPort).
9.
DP
: When the selected input source is DisplayPort this LED
will illuminate solid green.
10.
HDMI
: When the selected input source is HDMI this LED will
illuminate solid green.
11.
VGA
: When the selected input source is VGA this LED will
illuminate solid green.
POWER
MENU
ENTER
_
+
SOURCE
DP
HDMI
VGA
1
2
3
4
5
6
7
8
9
10 11
