30
8-Button Wall Plate Ethernet Keypad User Manual (LB-KP8E-ICP / LB-KP16E-ICP)
CONFIGURATION
THE BACKGROUND
LIGHT BAR ALLOWS
USER TO INSTANT-
LY CHANGE THE
LEDS LIGHTING
PERCENTAGE
BASED ON THE
ORIGNIAL ILLUMI-
Click on the Relay 2 button. Relay 2 should turn on and the button should remain
high-lighted (press state). Click on the Relay 2 button again. Relay 2 should turn off
and the button should return to normal (release state). On the LB-KP8, pressing the F3
button should turn on Relay 2 and the button should turn blue (press state). Pressing
F3 a second time should turn off Relay 2 and the button should return to white (release
state).
Standard button configuration example (RS-232 action)
The following configuration sets button, F4, to transmit an RS-232 serial string.
This configuration requires 2 steps:
1.
Configure the custom RS-232 action.
2.
Configure the button.
Configure the custom RS-232 action
On the top menu bar, click on Configure and then click on Action Definitions.
1.
In the Action Type drop down menu, select
RS-232.
2.
In the Action drop down menu, select
Add New Action
.
3.
In the Action Label box, type in
RS-232 string.
4.
In the RS-232 Channel drop down menu, select
1
.
5.
In the Transmit String box, type in
serial string.
6.
Click the
Submit Changes
button.
7.
The RS-232 action, named RS-232 string, has been created.
