29
www.brmelektronik.com
Alarm Termination
After the recovery process takes place on BRM devices,
alarm termination must be performed in order for the
device and cloud system to record this process and reset
the device. Alarm termination is done in 3 ways. When the
alarm is terminated, a notification is sent to the first number
registered in the system and to the BRM CLOUD system.
1- VIA BRM MAIN MODULE;
The alarm termination process
occurs by pressing the alarm termination button on the BRM
main module for 3 seconds.
2- VIA BRM CLOUD:
After the rescue operation is performed,
when the call center realizes that nobody is left in the
elevator, it gives an alarm termination command to the BRM
main module over the cloud.
3- AUTOMATICALLY OF BRM MAIN MODULE:
If the BRM main module has not terminated
the alarm within 4 hours after the alarm. It checks the filters and ends the alarm if there is no
alarm condition in the system.