BRK electronic C0250B Quick Manual Download Page 1

C A R B O N

A L A R M

MONOXIDE

CAT.

 

C0250B/CO250LB

10YR CO SENSOR  

10YR ALARM LIFE

ELECTROCHEMICAL  

CO SENSOR

Most accurate technology available for 

detecting carbon monoxide as com-

pared to other sensing technologies

TWO SILENCE 

FEATURES

Silences low battery chirp for up to 

eight hours or silence nuisance alarm 

for several minutes.

END OF LIFE SIGNAL 

Provides audible notice when alarm 

needs to be replaced after 10 years.

TAMPER RESISTANT

LOCKING PIN

Locks alarm cover to prevent removal 

of battery. Perfect for apartment, 

dormitory or hotel applications.

9V BATTERY  

INCLUDED

 

Available in the following versions:

CO250B  

Alkaline Battery

CO250LB 

5 Year Lithium Battery 

Description:

BRK Model CO250 is a single station carbon monoxide alarm specifically designed 

for residential and institutional applications including sleeping rooms of hospitals, 

hotels, motels, dormitories, and other multifamily dwellings as defined in standard 

NFPA 101. Model  CO250 has been fully tested and complies with, UL2034, NFPA 

720, and NFPA 101 and other agencies that model their codes after the above 

agencies. It meets building codes where battery operated carbon monoxide alarms 

with silence are required.

BRK Model CO250 is a state of the art carbon monoxide alarm designed to provide 

early warning of the presence of carbon monoxide. It features an electrochemi-

cal carbon monoxide sensor, an 85dB horn, a full function test switch and a red 

LED light that indicates DC power or alarm. The CO250B features a 9V alkaline 

battery and the CO250LB a 9V 5 year lithium battery. This alarm has two silence 

features. Low Battery Silence: Temporarily silence the low battery chirp for up to 

eight hours. Alarm Silence: Silence alarm for several minutes. It also features a 

tamper resistant locking pin that locks alarm cover to prevent removal of battery. 

Perfect for apartment, dormitory or hotel applications. The compact, low profile de-

sign complements any décor. Battery installation and removal can occur while the 

unit is mounted to the ceiling or wall via the hinged cover. When voltage drops to 

a pre-set warning level, the horn will “chirp” approximately once per minute to in-

dicate a fresh battery is needed. To insure the battery is always replaced properly, 

the cover is designed to resist closing when 

the battery is missing. Designed 

for wall or ceiling mount-

ing. Includes mount-

ing anchors and 

screws. 

9V Battery Powered

CO

Reviews: