Brivo ACS Installation Manual
ACS5000-E
ENG-WI-001 © 2005 Brivo Systems, LLC. All rights reserved.
Page 23
a) The ADMIN port is a 10/100 Ethernet interface with RJ45 jack for connecting the
MAIN BOARD to a laptop or PC to gain access to the local administrative
interface for debug and manual configuration utilities.
b) The port uses auto-sensing technology to determine polarity, which permits
either a straight or crossover cable to be used between the board and the
computer.
Connect the LAN to the MAIN BOARD
Figure 14.
Connect LAN to MAIN BOARD
1. Connect the LAN to the MAIN BOARD according to the instructions in the
Networking
Guide
attached to this document.
a) The LAN port is a 10/100 Ethernet interface with an RJ45 jack for connecting the
MAIN BOARD to a Local Area Network in order for it to gain connectivity to the
Internet and Brivo Central.
b) Use a straight, (i.e., non-crossover) cable to connect this port to a local hub,
switch or router that has connectivity to the Internet.
Wire Doors
For each board node to be used for controlling a door, as indicated in the completed
Installation
Worksheet
, make the following connections.
NOTE: Doors can be wired to the MAIN BOARD or to expansion boards, including
both DOOR BOARDs and INPUT OUTPUT BOARDS.