background image

Owners

Manual

Auto EMS

To The Owner

Dear Owner,

Congratulations on selecting a Brivis Heating System.

At Brivis we take pride in all aspects of servicing our customers. Our people are committed

to upholding the ethics originally formulated by my father when he founded Brivis over 40

years ago. Our aims are to ensure your comfort and satisfaction by providing the best

quality product and service, together with a genuine concern for our environment.

To all new customers buying a Brivis product for the first time, welcome!

If you are already an established Brivis customer, thank you for your continued support. I

am sure you will be happy with the choice you have made.

Yours sincerely,

Tim O'Brien

Managing Director

Brivis Australia Pty Ltd

Understanding Central Heating.

To make the most of your central heating, you first need to be familiar with its basic

operating principles.

Put simply, your Brivis system consists of three major components; a heater, a ductwork

system and a wall control, which, in this case is the revolutionary Brivis Networker.

The heater draws air out of the house through a large, centrally located Return Air duct.

Summary of Contents for Auto EMS














Reviews: