1 PARTS CHECKLIST
Please retain all packaging until you are certain no parts are missing.
After assembly, please dispose of all packaging carefully.
Frame with seating
Hood
Bumper bar
Front Wheel x2
Rear wheels x 2
Rear axle
Rear wheel cover x2
Tray
Raincover (optional)
2 OPENING THE PUSHCHAIR
a. Release the latch that keeps the stroller folded.
b. Pull the handles, lower the front legs.
c. Pull firmly until the side mechanisms are locked and you hear the ‚click’.
Install the tray.
WARNING:
Ensure that all locking devices are engaged before use.
3 FITTING THE REAR WHEELS
a. Insert a metal washer and a wheel to the axle. Repeat with the other side.
b. Fix the wheels to the axle with the metal slide locks. Finally push the cover to the wheels.
c. Push the axle with mounted wheels into the tube of frame. You must hear the ‚click’.
4 FITTING THE FRONT WHEELS
Push each front wheel on the the stroller leg until it clicks into position.
5 FITTING THE BUMPER BAR AND HOOD
a. Push the clips on the sides of the hood onto the frame. Pull the back of the hood down
over the back of the pushchairs backrest.
b. Insert two ends of bumper bar tube into the plastic slots on the frame.
c. To remove the bumper bar press the buttons (1) on the frame and take (2) the bumper bar
off.
6 SWIVEL WHEELS
To lock the wheels into position push the locking lever down. To allow the front wheels to
swivel lift the locking lever up.
NOTE:
Always apply brake before loading or unloading a child from the pushchair.
