PLASTIC RING
HANDLE
BACK PLATE
O-RING
RETAINING SLEEVE
HOX.006CP/MB/BB parts included
Installation of HOX.006 trim sets (needs to be used with HOX.006V)
HOX.006V parts included
IMPORTANT:
For valve body installation, please refer to instructions included with HOX.006V.
For HOX.006 trim sets, please follow below steps to install:
● Lock the retaining sleeve to the valve body.
● Apply a narrow layer of silicone sealant around the retaining sleeve and carefully press in place.
● Install O-ring into holes of the back plate and slide the back plate onto the retaining sleeve. (O-ring should be applied
with soapy water or plumber grade grease for easy assembly.)
● Assemble the handles, the plastic ring included in HOX.006V must be placed between the sleeve and the handle.
● Parts should be assembled in sequence illustrated by Figure 2.
Maintenance
We do NOT recommend you use any household cleaners to clean the product because these cleaners change substance
or formula too frequently. The product should be always cleaned only with soapy water and rinsed with clean water and
dried with a soft cloth.
HANDLE
BACK PLATE
O-RING
RETAINING SLEEVE
PLASTIC RING
Figure 2
A
3 - 3
● Apply a narrow bead of silicone sealant around the back edge of the back plate and carefully press into position.
