7
EN
10 USING THE HOOD
Place the hood through the opening above the pushing handle (a). Then close the zip. Connect
the ends of hood to the screw clamps on both sides of the frame (b).
To open the hood, push the upper part of the hood to the front and lock the fasteners on the
sides (c). To close the hood, open the fasteners on the sides and push the hood back towards
the pushing handle.
11 USING THE HARNESS
A 5- point harness is provided to restrain your child. To fasten the harness push clips into
buckle. To unfasten push the button in the centre of the buckle and remove the clips.
The length of each strap can be changed by using adjusters. By using these, adjust the harness
as compliant with the length of your child.
WARNING:
Always use the crotch strap in combination with the waist belt.
12 INSTALLING THE FOOT COVER
Place the calf support to the lower part of the cover. Draw the cover under the bumper bar and
fi
x the buttons. Fasten with Velcro ribbons on the sides.
13 USING THE THE BRITTON
®
BABYWAY CAR SEAT
WARNING! This stroller is only compatible with the Britton
®
BabyWay car seat.
WARNING!
Always engage the brake when you attach the carseat onto the chassis.
WARNING!
Never lift the carseat when it is assembled onto the chassis.
Fixing the car seat onto the frame
Open the covers of car seat adaptors (a).
Hold the car seat by the handle and assemble it onto the adapter. Press the carseat straight
down into the adapter until you hear a clicking sound. Make sure that the carseat clicks in prop-
erly into the adapters two attachment points by lifting car seat up a little from handle.
WARNING!
Hold the car seat at all times by the carrying handle. Do not release your grip until
you have secured the car seat into position.
WARNING!
Make sure before usage that all locks are locked into position.
Remove the carseat from the adapter
Engage the brake. Press the two buttons on the carseat (b)and lift the carseat straight up.
WARNING!
Always engage the brake before you attach and detach the carseat.
IMPORTANT!
Before you fold the chassis you must remove the car seat.
14 FOLDING THE PUSHCHAIR
Note: Before folding be sure that the backrest is in the uppermost position.
Always remove the rain cover, by placing it to the basket and push the hood fully to the back.
Engage the brake and open the retainers of front wheels. Lift the red second lock on the right
side of the pushing handle (a). At the same time lift the fasteners in the upper part of the frame
(b) and push the pushing handle forward (c). Continue until the pushchair has been folded into
