Briteq STAGE PAINTER 12, User Manual

Page: 10 / 16

9-
4.2 Easy Controller
The easy remote control is used only in master/slave mode. By connecting to
the 1/4” microphone jack of the first unit, you will find that the remote controller
on the first unit will control all the other units for Stand by, Function and Mode
selection
4.3 DMX Controller
Use universal DMX controller to control the units, you have to set DMX address from 1 to
512 channel so that the units can receive DMX signal.
Press the MENU button up to when the DMX Address is showing on the display. Press
ENTER button and the display will blink. Use DOWN and UP button to change the DMX512
address. Once the address has been selected, press and keep ENTER button to store. To
go back to the functions without any change press the MENU button or wait for 1 minute to
exit menu mode.
Please refer to the following diagram to address your DMX512 channel for the first 4 units:
Channel Mode Unit 1 Unit 2 Unit 3 Unit 4
3 channels 1 4 7 10
6 channels 1 7 13 19
9 channels 1 10 19 28
12 channels 1 13 25 37
15 channels 1 16 31 46
Stand By Blackout the unit
Function 1. Sync. Strobe
2. Async strobe
3. Sound Strobe
Select
Manua Color
or color 1-32
Select
show 1-8
or Auto fade
Select Speed
1. Slow
2. middle
3. Fast
Mode Sound (LED OFF) LED On Slow blinking Fast blinking