4.3
BASIC INSTRUCTIONS FOR DMX512
OPERATION
STAGE 1 DMX MODE 1
RED, GREEN & BLUE COLOR SELECTION
CH1, CH2 & CH3 control the intensity ratio of each of the RED, GREEN & BLUE LEDs.
When the slider is at the highest position (255) the intensity of the color is the
maximum.
CH1, CH2 & CH3 can be combined together to create over 16 million colors.
CH1, CH2, CH3 have priority over CH4, CH5, CH6 & CH7
YELLOW, CYAN, PURPLE & WHITE
CH4, CH5, CH6 & CH7 are independent colors and cannot be mixed with any other
color control channel.
When multiple channels are used at the same time;lower channel number is priority
(i.e. CH4 has priority over all channels 1-6)
STROBE
CH8 is the strobe channel and controls the strobe effects of CH1, CH2, CH3, Ch4,
CH5, CH6, & CH7
The strobe is with an adjustable speed with a maximum of 20Hz.
The strobe is not active with CH9 & CH12
MODE SELECTION
CH9 allows the user to activate DMX MODE 1 (0-244) or DMX MODE 2 (245-255).
CH9 values 5-244 can only be activated when CH1 to CH7 are not
activated
When Color-Cycle Mode 4 is selected CH11 controls the speed of the Color-cycle.
ID ADDRESS SELECTION
CH10 is used to select the target ID address.
Each independent DMX address may have upto 66 independent ID addresses.
An ID address of 0 will be activated by all ID address locations.
MODULE SELECTION
CH11 controls set combinations of the three LED MODULES present in each unit.
CH11 has priority over CH12 when first activated
EFFECT MACRO
The effect MACRO channel allows the user to select from combinations of different
colors and LED modules in a quick-and-easy action.
CH12 has priority over color control channels (CH1, CH2, CH3, CH4, CH5, CH6 &
CH7)
CH12 has priority over CH11 when first activated
CH12 has priority over Ch9 & Ch11
4
USING A DMX512 CONTROLLER
23
2008.8.13
Summary of Contents for LED Blaster 108
Page 1: ...USER MANUAL Ver 1 0 WWW BRITEQ LIGHTING COM...
Page 2: ......
