Briteq BTX-Cirrus, Operation Manual

Page: 5 / 21

ENGLISH OPERATION MANUAL
BRITEQ
®
3/18 BTX-CIRRUS
DESCRIPTION:
DEVICE:
1. Tilt locking handle
2. Pan locking handle
Pan and Tilt mechanism can be locked every 45°
Caution:
The head and arm must be unlocked before operation!
CONTROL PANEL:
3. Wireless DMX Led
4. LCD Touchscreen display
5. MODE button
6. UP button
7. DOWN button
8. ENTER button
REAR PANEL:
9. DMX XLR output
10. DMX XLR input
11. Artnet gigabit output
12. Artnet gigabit input
13. PowerCon
®
TRUE1 Input
14. PowerCon
®
TRUE1 Output
15. Circuit breaker
Hint: Please check our website for special cable assemblies that contain both power (3x1.5mm² with Neutrik
PowerCON
®
TRUE-1) and balanced signal (XLR 3pin or 5pin) in one cable. Different lengths are available:
1.5m, 3m and 5m, very convenient!
OVERHEAD RIGGING
•
Important: The installation must be carried out by qualified service personal only. Improper
installation can result in serious injuries and/or damage to property. Overhead rigging requires
extensive experience! Working load limits should be respected, certified installation materials
should be used, the installed device should be inspected regularly for safety.
•
Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging
and servicing.
•
Locate the fixture in a well ventilated spot, far away from any flammable materials and/or liquids. The
fixture must be fixed at least 50cm from surrounding walls.
•
The device should be installed out of reach of people and outside areas where persons may walk by or be
seated.
•
Before rigging make sure that the installation area can hold a minimum point load of 10times the device’s
weight.
•
Always use a certified safety cable that can hold 12 times the weight of the device when installing the unit.
This secondary safety attachment should be installed in a way that no part of the installation can drop
more than 20cm if the main attachment fails.
•
The device should be well fixed; a free-swinging mounting is dangerous and may not be considered!
•
Don’t cover any ventilation openings as this may result in overheating.