Briteq BEAM MATRIX5x5-RGBW, Operation Manual

Page: 12 / 112

ENGLISH OPERATION MANUAL
BRITEQ
®
10/109 BEAMMATRIX5x5-RGBW

Press the E
NTER button to confirm: the display shows “CONFIRM?”

Use DOWN and UP buttons to select YES / NO

Press the ENTER button to confirm.

SAVE was selected: the current settings of the setup menu are saved to memory.

LOAD was selected: the previously saved settings are loaded.
PARAMETER name DEFAULT VALUE USER defaults 1 USER defaults 2
E
THERNET
P
ROTOCOL
Artnet Current setting in the menu Current setting in the menu
DMX C
HANNEL MODE
100 CH Current setting in the menu Current setting in the menu
N
O
DMX
MODE
Freeze Current setting in the menu Current setting in the menu
LED
BEHAVIOUR
Halogen Current setting in the menu Current setting in the menu
WHITE BALANCE RGBW = 255
Current white balance settings
for all pixels are saved
Current white balance settings
for all pixels are saved
CUSTOM S
TATIC COLOR
RGBW = 255 Current custom color settings Current custom color settings
MASTER DIM 100% Current setting in the menu Current setting in the menu
DIM C
URVE
Square Current setting in the menu Current setting in the menu
F
LOW INVERT
OFF Current setting in the menu Current setting in the menu
SOUND MODE
SENSITIVITY
25 Current setting in the menu Current setting in the menu
SOUND MODE C
HASE REPEAT
3 Current setting in the menu Current setting in the menu
AUTO RUN C
HASE REPEAT
SP=50, REP=3 Current setting in the menu Current setting in the menu
EFFECT MODE
CFADE,
SP=50 + FL=00
Current setting in the menu Current setting in the menu
A
UTO
L
OCK
M
ENU
OFF Current setting in the menu Current setting in the menu
NO DMX
BLINK
ON Current setting in the menu Current setting in the menu
ETHERNET IP ADDRESS
Used to set the IP address of the projector while controlled using the Ethernet ports.

Press the MODE or UP/DOWN buttons until the desired function is showing on the display.

Press the ENTER button: the values can be changed

Use DOWN and UP buttons to select the desired values for the IP-address.

Once the correct IP-address shows on the display, press the ENTER button to save it.
Remark: an IP address in ArtNet topology generally starts with 2.x.x.x or 10.x.x.x with 255.0.0.0 for netmask.
ETHERNET NET MASK
Used to set the Net Mask of the projector while controlled using the Ethernet ports.

Press the MODE or UP/DOWN buttons until the desired function is showing on the display.

Press the ENTER button: the values can be changed

Use DOWN and UP buttons to select the desired netmask, there are 3 options:

255.000.000.000

255.255.000.000

255.255.255.000

Once the correct option shows on the display, press the ENTER button to save it.
DMX UNIVERSE
Used to set which DMX-universe should be used while controlled via the Ethernet ports.

Press the MODE or UP/DOWN buttons until the desired function is showing on the display.

Press the ENTER button: the values can be changed

Use DOWN and UP buttons to select the desired DMX-universe from 000 to 255.

Once the correct universe shows on the display, press the ENTER button to save it.
Remark: the 512 DMX-channels of the selected DMX-universe are available on the DMX-output without any
kind of extra configuration.
ETHERNET PROTOCOL
Used to select which Ethernet protocol you want to use for communication.

Press the MODE or UP/DOWN buttons until the desired function is showing on the display.

Press the ENTER button: the values can be changed

Use DOWN and UP buttons to select the desired Ethernet protocol.

Once the correct option shows on the display, press the ENTER button to save it.
Remark: currently only the Art-Net protocol is supported. Other protocols will follow, see firmware updates.